Liquid ejected from the battery may cause irritation or burns. This warranty gives you specific legal rights and. Use this tool in a well ventilated area when sanding ferrous metals.
There is a risk of fire or explosions. can self-ignite in sander dust bag or elsewhere and cause fir, because sparks are generated. c) Disconnect the plug from the power source and/or the battery pack from the, power tool before making any adjustments, changing accessories, or storing, power tools.
Pour enlever la pice de ponage de contour, la pousser vers lavant, puis tirer sur lextrmit arrire du support du calibre (fig. N^wr$y[L;MN67>/4}}Ck;M_mivN Nuk;MN:wN);f,GiPFf&yvac.4cw. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.
6 et 7) Choisir le calibre de la pice de ponage de contour qui convient le mieux votre application.
connecting to power source and/or battery pack, picking up or carrying the tool. Do not polish any car in direct sunlight or when the body is hot. Use clamps or other practical way to secure and support the workpiece to a stable, Holding the work by hand or against your body is unstable and may lead to loss. : Black-And-Decker Black-And-Decker-579208-00-Instruction-Manual-159506 black-and-decker-579208-00-instruction-manual-159506 black-and-decker pdf, Open the PDF directly: View PDF .Page Count: 2, below may result in electric shock, fire and/or serious personal injury. ALWAYS WEAR CERTI-, ANSI Z87.1 eye protection (CAN/CSA Z94.3), Sanding of lead-based paint is not recommended. call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. Fit the finger attachment (4) onto the sanding.
Children should be supervised to ensure that they do not play with the appliance. To switch the tool on, slide the on/off switch (1) to the forward position l. To switch the tool off, slide the on/off switch (1) to the back position O.
Warning! condition that may affect the tools operation.
Water entering a power tool.
This product must not be disposed of with normal household waste.Should you find one day that your black and Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. To reduce the risk of injury, the user must read the instruction manual. The base attaches and removes the same as. e) Do not overreach. Warning!
should be kept away from the immediate work area.
The detail finger can be used for light sanding and for sanding into corners. |L{_EV,~u*^{Rcx/~MRI>ti~Ht ]7: m;at=w v: t
D D E E T T A A I I L L S S A A N N D D E E R R P P O O L L I I S S H H E E R R, I I N N S S T T R R U U C C T T I I O O N N M M A A N N U U A A L L, P P L L E E A A S S E E R R E E A A D D B B E E F F O O R R E E R R E E T T U U R R N N I I N N G G T T H H I I S S. P P R R O O D D U U C C T T F F O O R R A A N N Y Y R R E E A A S S O O N N : : If you have a question or experience a problem with your Black & Decker purchase, go to, HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS. See Sanding Lead Based Paint for.
Shorting the battery terminals together may, d) Under abusive conditions, liquid may be ejected from the battery, avoid contact. outdoor use. These include: The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another.
Keep bystanders, children, and visitors away while operating a power tool.
:oS]: 6!:NguC4y]i! bI!p+eokTh}VcQIc4Me"J5PfR##z zLSrgF(g:(>4t93NLc^y3i| Warning! line voltage resulting in loss of power and overheating.
If this happens remove the bonnet and shake hard to remove dried wax.
The declared vibration emission value may also beused in a preliminary assessment of exposure.
The finger base is used for fine detail sanding.
Power tools create sparks which may ignite the, c) Keep children and bystanders away while operating a power tool.
that cannot be controlled with the switch is dangerous and must be repaired. Pay special attention to the following: Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings.
Take special care when sanding paint which is possibly lead based and may produce toxic dust: Do not let children or pregnant women enter the work area. Your email address will not be published. ment should be performed by authorized service centers or other qualified service personnel.
Store idle tools out of reach of children and other untrained persons. Garanta para uso domstico por dos aos completos Black & Decker (U.S.) garantiza este producto por dos aos completos contra cualquier falla originada por materiales o mano de obra defectuosos. device (RCD) protected supply.
b) Do not use the power tool if the switch does not turn it on and off.
Contact with or inhalation of dusts arising from sanding applications may endanger the health of the operator and possible by stand protection against dust and fumes and ensure that persons within or entering the work area are also protected. Always check that the power supply corresponds to the voltage on the rating plate.
Returns should be made, sale). Hold the tool with the sanding base facing, Place the sanding mesh (5) onto the sanding base, making sure that the holes in the sheet line up with the holes in the base. battery packs may create a risk of injury and fire.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Follow instructions in the, Use of unauthorized parts or failure to follow, Hold tool by insulated gripping surfaces when performing an operation where the, Wear appropriate personal hearing protection during use. The dust cassette should be emptied after every 10 minutes of use. B Optional accessory), Fitting and removing the dust cassette (fig. tf4yhdQQ}twoz?WO Failure to follow all instructions listed. Such preventive safety measures reduce the risk of starting the power, d) Store idle power tools out of the reach of children and do not allow persons. These surfaces may have to be polished twice, to restore the finish.
Continuous satisfactory operation depends upon proper tool care and regular cleaning. Fit the appropriate sanding sheet onto the finger attachment.
Replace the extension cable if damaged or defective. Use the correct power tool for your application.
:S]i :n4Bt+MN4Bt ;EAt+J4yh;MFV0Ea4xJ/+tS]i :S]iTW. With the bonnet, and pad, you can use the tool as a random orbit polisher, Fitting and removing the polishing bonnet and foam pad (Fig. Comment document.getElementById("comment").setAttribute("id","aa1d24c8a022adec7d24bd22dce2180b");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. You can check the location of your nearest authorised repair the address indicated in this manual. Protective, equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection.
xknq&76m"7uW}$ |l Whenever possible, use a vacuum extractor for dust collection. Use of any other. Since it is difficult to identify whether or not a paint contains lead without a chemical analysis. Clean your tool out periodically.
PDF fileCraftsman Mega Mouse Sander Manual Craftsman 4 Amp 1/2 Sheet Sander Model 315.116164 Made in USA Craftsman Variable Speed Scroll. hard hat, or hearing protection must be used for appropriate conditions.
For a fine finish for large detail sanding. Always use an approved extension cable suitable for the power input of this tool (see technical data). personnel to provide customers with efficient and reliable power tool service.
:&} ):S]i :S]iTW4Bt+MN.4eTW}! Le non-respect de toutes les directives suivantes prsente des risques de secousses lectriques, d'incendie ou de blessures graves.
The performance of your tool depends on the accessory used. Ordinary painting masks do not offer this protection.
Do not abuse the cord. If damaged, have the power tool repaired before use. Nettoyer loutil rgulirement. When operating a power tool outside, use an outdoor extension cord marked "W-A". Do not use for wet sanding. used for appropriate conditions will reduce personal injuries. The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. Many accidents are caused by poorly maintained tools.
Direct particles away from face and body.
power tool.
Due to the danger of.
All the accessories listed below are available in our Piranha range. De entrar polvo en sus ojos, boca, o que este permanezca sobre su piel puede promover la absorcin de qumicos dainos.
Make sure the extension cord is in good condition before using. Wear safety glasses and a dustmask. Sanding of lead based paint is NOT RECOMMENDED due to the dif, contaminated dust. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.
changing accessories, or storing the tool. in the outlet, reverse the plug. cutting tool may contact hidden wiring or its own cord. By using these accessories you will get the very best from your tool. INSTRUCTIVO DE OPERACIN, CENTROS DE SERVICIO, Catalog No. Wear a dust mask specification cally designed for protection against toxic dust and fumes and ensure that persons within or entering the work area are also protected. Keep cord away from heat, oil, sharp edges or moving parts.
Warning! Workers should wash and clean up BEFORE eating, drinking, Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils, All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the, Plastic drop cloths should be gathered up and disposed of along with any dust chips or, other removal debris. Ajustement et dpose dune pice contour (fig.
tools, with sharp cutting edges are less likely to bind and are easier to control.
0800 339 258 (NZ), Haesehorn TL Black INSTRUCTION MANUAL Haesehorn TL Black 103987 WWW.QAZQA.COM, INSTRUCTION MANUAL Leopard TL Black 103985 www.qazqa.com, INSTRUCTION MANUAL Raga CL Black 103513 Overall Sizes: www.QAZQA.COM. Before use, inspect the extension cable for signs of damage, wear and ageing.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Black & Decker Service Centre in order to avoid a hazard. This enables bet-. be used. Distractions can cause you to lose control. When the front part of the tip is worn, detach it from the sheet, reverse it and press it onto the sanding base.
Carrying power tools with your finger on the switch or energizing power tools that have, d) Remove any adjusting key or wrench before turning the power tool on. This tool is intended for consumer use only. Let the tool work at its own pace.
INSTRUCTIVO DE OPERACIN, CENTROS DE SERVICIO Y PLIZA DE GARANTA. Cluttered benches and dark areas invite accidents. Do not force tool.
While holding the tool, pull the dust cassette (2) off the tool. 3). Vibration total values (triax vector sum) according to EN 60745: Australia & New ZealandStanley Black & Decker82 Taryn Drive, Epping, VIC 3076 AustraliaTel.1800 338 002 (Aust) or Tel.
The diamond-shaped tips (13) can be reversed and replaced when worn.
Properly maintained cutting tools with sharp.
Disconnect the plug from the power source before making any adjustments.
Let the tool work at its own pace. Before performing any maintenance, switch off and unplug the tool.
Remove adjusting keys or wrenches before turning the tool on.
Please check with the retailer for their specific. are used to help you recognize this information. Warning! Extended drywall sanding is not recommended for this product. With this sanding base, you can use the tool as a random orbit sander, Fitting and removing the sanding base (Fig. your finger on the switch or plugging in tools that have the switch on invites accidents.
% %PDF-1.4
If it still does not fit, contact a qualified electrician to, install a polarized outlet. There is an increased risk of electric shock if your body is, c) Do not expose power tools to rain or wet conditions.
For a medium finish for large detail sanding. Zone de travail CONSERVER CES MESURES. They should be placed in sealed refuse receptacles and disposed of, through regular trash pick-up procedures.
stream
Dispose of dust particles and any other removal debris safely.
Use of the power tool for operations different from those intended could result, a) Recharge only with the charger specified by the manufacturer.
cutting edges are less likely to bind and are easier to control. Use of an RCD reduces the risk of electric shock. All toys, washable furniture and utensils used by children should be washed thoroughly, polishing a wide array of flat surfaces such as hardwood floors, furniture, boats and other. 2), With this sanding base, you can use the tool as a detail sander or an orbital sander, Fitting and removing the sanding base (Fig. Save all warnings and instructions for future reference. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
Unmodified plugs and, matching outlets will reduce risk of electric shock.
Do not use detergents such as hand cleaners that contain abrasives.
MESURES DE SCURIT AVERTISSEMENT : Lire et comprendre toutes les directives.
Evite el contacto prolongado con el polvo proveniente del lijado, aserrado, amolado y taladrado elctrico y otras actividades de construccin. To remove the dust cassette, pull it to the rear and off the tool.
left attached to a rotating part of the tool may result in personal injury. Use of an extension cable not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. Keep proper footing and balance at all times. The dust cassette should be emptied every 10 minutes of use. Maintain tools with care.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
fire, do not use your sander to sand magnesium surfaces. Make this product avail- able for separate collection.Separate collection of used products and packaging allows materials to be recycled and used again.Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Warning! The term "power tool" in the warnings refers to your mains-operated (corded) power. dealer for the proper (NIOSH approved) mask. Do not sand magnesium! wire will make exposed metal parts of the tool "live" and shock the operator.
:F_Nu)cEAt+JEa4yD ti8O~tiE;}\wmN!ltC4vFF_!4"&y3yH;MN/brs1tsBCV\xYt8dn:BC0Y}!/4y;MvkAit^X+`wMu&iCiaS66k4uTvVi6!4uNS'MDt+M]4xheCii.!4xs;=Wi^n4uZ[]hw 5}{pi{mhqt}CiwqjEj!4m#JM2&aC;M[iN66Tw!4yH;M[YhLDIq4m}Cl; bhqDU&iCiNN;72Vt+ BiNV\wNM_i,F3@}&yCD_Fi>Ng4wN6>e]hN]h
This tool includes some or all of the following features.
dangerous in the hands of untrained users. For a coarse finish for large detail sanding. Keep your hair, clothing, and gloves away from moving parts. g) Use the power tool, accessories and tool bits etc., in accordance with these, instructions, taking into account the working conditions and the work to be per-, formed.
When the whole tip is worn, remove it from the sanding base and fit a new tip. Shake the lid (10) and dust cassette (2) to empty the contents, the filter (11) inside the lid (10) can be cleaned with a soft dry brush. Use these cleaners only by hand. Do not use a power tool while you are tired or under the influence of, drugs, alcohol or medication.
For small hard-to-reach areas. The symbols below. Do not operate power tools in explosive atmospheres, such as in the presence of, Power tools create sparks which may ignite the dust or. The following table shows the correct size to use depending on cord length and nameplate ampere rating. Also use face or dust mask if operation is dusty.
a) Stay alert, watch what you are doing and use common sense when operating a, power tool. Contact with a "live". Do not use tool while tired or under the influence of drugs, alcohol, or. It is important for you to read and understand this manual.
When servicing a tool, use only identical replacement parts.
Home Black Decker BLACK DECKER BLACK+DECKER Sander Instruction Manual, BLACK DECKER BLACK+DECKER Sander Instruction Manual. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool.
Other Important Safety Warnings and Instructions Extension Cords When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. ..safety alert symbol /min.
579208-00 (FEB-02-1) Copyright 2002 Black & Decker Printed in China, Be sure your power supply agrees with nameplate marking. A wrench. Never use the cord for carrying, pulling or unplugging the. The following pictograms are shown on the tool:Warning! seek medical help.
Do not change the plug in any way, eliminates the need for the three wire grounded power cord and grounded power supply, outlet. When using a cable reel, always unwind the cable completely.
Hold power tools by insulated gripping surfaces when performing an operation, where the cutting tool may contact hidden wiring or its own cord. unfamiliar with the power tool or these instructions to operate the power tool. always using identical replacement parts. :S]i :`NuS]i :&mS]hCt+MN4Bt+ DAtM+:F_NuCiw}! Never modify the plug in any way. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life.
Do not eat, drink or smoke in the work area. If you can't find the answer or do not have access to the internet.
we recommend the following precautions when sanding any paint: should be replaced daily or whenever the wearer has difficulty breathing.
The polishing bonnet and foam pad attach to the round random orbit base.
Black & Decker offers a full network of company-owned and authorized service locations. The information it contains, relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's, operation. Use vestimenta protectora y lave todas las reas expuestas con agua y jabn. Maintain tools with care. Use the correct tool for your application. 60 grit large detail sanding sheet with two replacement tips.
7). Your tool has been designed to operate over a long period of time with a minimum of maintenance.
c) Prevent unintentional starting. El producto defectuoso ser reemplazado o reparado sin cargo alguno en cualquiera de las siguientes dos maneras: La primera, que resulta nicamente en cambios, es regresar el producto al vendedor al que se compr (en la suposicin que es un distribuidor participante).
g*2Ne3'o6h=6?5}tORBc\z1v1&t"c4y;MNk_6wFE;PziN/RiFONTv}N_iq*=v}F(o4xX"`kqh| W2vKh.chj%4x(qCI;(y4x(u3yh;(}i0wBV+ jiPN/jiE;MFWw}QNiNw}FS4&}hs=4x=4^vc Fi; v;e^L+Z&}6S]i :Bt+ DAt+J/Do4eTW}! Use only accessories that are recommended by the manufacturer for your model.
-- Fri. to speak with an agent. f) If operating a power tool in a damp location is unavoidable, use a residual current.
Cluttered or dark areas invite accidents. :F_Nu)cEAt+J4xJ.4lCt+MNztS]:t]v;MFV0Ea4y; Dti :S]iEtivDAt+J4xBV0E4y;MN/D]TW}! Black & Decker owned and authorized Service Centers are listed under "T, Electric" in the yellow pages of the phone directory, This warranty does not apply to accessories. the switch is dangerous and must be repaired. ADVERTENCIA: LASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. Read all safety warnings and instructions.
:F_NuTWS]iTza4Bt+ DAt+ D:%/DAt+MN/D4y +>F_NuS]i :S]h Dont expose power tools to rain or wet conditions. Replace damaged, tool.
Do not use tool if switch does not turn it on or off.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
7 0 obj If, contact accidentally occurs, flush with water.
Lower voltage will cause loss of power and can. Warning! In both cases, gradually change to a fine grit for, Recommended accessories for use with your tool are available at extra cost from your local.
Slide the dust cassette (2) onto the tool and make sure that it is securely located. This will ensure that the safety of the power tool is maintained. Under some, Some dust created by power sanding, sawing, grinding, drilling, and other, Allowing dust to get into your mouth, eyes, or lay on the skin may promote, Use of this tool can generate and/or disperse dust, which may cause serious, When working on metal surfaces, do not use the dustbag or a vacuum cleaner, Only those dust masks suitable for working with lead paint dust and fumes should. reglamentario, tal como una mscara contra el polvo especialmente diseada para filtrar partculas microscpicas.
Use of dust collection can, a) Do not force the power tool. This tool is double insulated; therefore no earth wire is required. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. Many accidents. Do not push downlet the sander do the work.
If you require an accessory that is listed below but is not supplied with your sander please visit our website at www.blackanddecker.eu. Keep cutting tools sharp and clean. MS700 Form No. Warning! f) Dress properly.
e) Maintain power tools. The greatest danger of lead poisoning is to children and pregnant. For severe damage, only a professional car detailer or reconditioner, may clog the bonnet. a) Keep work area clean and well lit. b) Do not operate power tools in explosive atmospheres, such as in the presence of, flammable liquids, gases or dust . Power tools are dangerous in the hands of untrained users.
There is a risk of fire or explosions. can self-ignite in sander dust bag or elsewhere and cause fir, because sparks are generated. c) Disconnect the plug from the power source and/or the battery pack from the, power tool before making any adjustments, changing accessories, or storing, power tools.
6 et 7) Choisir le calibre de la pice de ponage de contour qui convient le mieux votre application.
connecting to power source and/or battery pack, picking up or carrying the tool. Do not polish any car in direct sunlight or when the body is hot. Use clamps or other practical way to secure and support the workpiece to a stable, Holding the work by hand or against your body is unstable and may lead to loss. : Black-And-Decker Black-And-Decker-579208-00-Instruction-Manual-159506 black-and-decker-579208-00-instruction-manual-159506 black-and-decker pdf, Open the PDF directly: View PDF .Page Count: 2, below may result in electric shock, fire and/or serious personal injury. ALWAYS WEAR CERTI-, ANSI Z87.1 eye protection (CAN/CSA Z94.3), Sanding of lead-based paint is not recommended. call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. Fit the finger attachment (4) onto the sanding.
Children should be supervised to ensure that they do not play with the appliance. To switch the tool on, slide the on/off switch (1) to the forward position l. To switch the tool off, slide the on/off switch (1) to the back position O.
Warning! condition that may affect the tools operation.
Water entering a power tool.
This product must not be disposed of with normal household waste.Should you find one day that your black and Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. To reduce the risk of injury, the user must read the instruction manual. The base attaches and removes the same as. e) Do not overreach. Warning!
should be kept away from the immediate work area.
The detail finger can be used for light sanding and for sanding into corners. |L{_EV,~u*^{Rcx/~MRI>ti~Ht ]7: m;at=w v: t
D D E E T T A A I I L L S S A A N N D D E E R R P P O O L L I I S S H H E E R R, I I N N S S T T R R U U C C T T I I O O N N M M A A N N U U A A L L, P P L L E E A A S S E E R R E E A A D D B B E E F F O O R R E E R R E E T T U U R R N N I I N N G G T T H H I I S S. P P R R O O D D U U C C T T F F O O R R A A N N Y Y R R E E A A S S O O N N : : If you have a question or experience a problem with your Black & Decker purchase, go to, HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS. See Sanding Lead Based Paint for.
Shorting the battery terminals together may, d) Under abusive conditions, liquid may be ejected from the battery, avoid contact. outdoor use. These include: The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another.
Keep bystanders, children, and visitors away while operating a power tool.
:oS]: 6!:NguC4y]i! bI!p+eokTh}VcQIc4Me"J5PfR##z zLSrgF(g:(>4t93NLc^y3i| Warning! line voltage resulting in loss of power and overheating.
If this happens remove the bonnet and shake hard to remove dried wax.
The declared vibration emission value may also beused in a preliminary assessment of exposure.
The finger base is used for fine detail sanding.
Power tools create sparks which may ignite the, c) Keep children and bystanders away while operating a power tool.
that cannot be controlled with the switch is dangerous and must be repaired. Pay special attention to the following: Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings.
Take special care when sanding paint which is possibly lead based and may produce toxic dust: Do not let children or pregnant women enter the work area. Your email address will not be published. ment should be performed by authorized service centers or other qualified service personnel.
Store idle tools out of reach of children and other untrained persons. Garanta para uso domstico por dos aos completos Black & Decker (U.S.) garantiza este producto por dos aos completos contra cualquier falla originada por materiales o mano de obra defectuosos. device (RCD) protected supply.
b) Do not use the power tool if the switch does not turn it on and off.
Contact with or inhalation of dusts arising from sanding applications may endanger the health of the operator and possible by stand protection against dust and fumes and ensure that persons within or entering the work area are also protected. Always check that the power supply corresponds to the voltage on the rating plate.
Returns should be made, sale). Hold the tool with the sanding base facing, Place the sanding mesh (5) onto the sanding base, making sure that the holes in the sheet line up with the holes in the base. battery packs may create a risk of injury and fire.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Follow instructions in the, Use of unauthorized parts or failure to follow, Hold tool by insulated gripping surfaces when performing an operation where the, Wear appropriate personal hearing protection during use. The dust cassette should be emptied after every 10 minutes of use. B Optional accessory), Fitting and removing the dust cassette (fig. tf4yhdQQ}twoz?WO Failure to follow all instructions listed. Such preventive safety measures reduce the risk of starting the power, d) Store idle power tools out of the reach of children and do not allow persons. These surfaces may have to be polished twice, to restore the finish.
Continuous satisfactory operation depends upon proper tool care and regular cleaning. Fit the appropriate sanding sheet onto the finger attachment.
Replace the extension cable if damaged or defective. Use the correct power tool for your application.
:S]i :n4Bt+MN4Bt ;EAt+J4yh;MFV0Ea4xJ/+tS]i :S]iTW. With the bonnet, and pad, you can use the tool as a random orbit polisher, Fitting and removing the polishing bonnet and foam pad (Fig. Comment document.getElementById("comment").setAttribute("id","aa1d24c8a022adec7d24bd22dce2180b");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. You can check the location of your nearest authorised repair the address indicated in this manual. Protective, equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection.
xknq&76m"7uW}$ |l Whenever possible, use a vacuum extractor for dust collection. Use of any other. Since it is difficult to identify whether or not a paint contains lead without a chemical analysis. Clean your tool out periodically.
PDF fileCraftsman Mega Mouse Sander Manual Craftsman 4 Amp 1/2 Sheet Sander Model 315.116164 Made in USA Craftsman Variable Speed Scroll. hard hat, or hearing protection must be used for appropriate conditions.
For a fine finish for large detail sanding. Always use an approved extension cable suitable for the power input of this tool (see technical data). personnel to provide customers with efficient and reliable power tool service.
:&} ):S]i :S]iTW4Bt+MN.4eTW}! Le non-respect de toutes les directives suivantes prsente des risques de secousses lectriques, d'incendie ou de blessures graves.
The performance of your tool depends on the accessory used. Ordinary painting masks do not offer this protection.
Do not abuse the cord. If damaged, have the power tool repaired before use. Nettoyer loutil rgulirement. When operating a power tool outside, use an outdoor extension cord marked "W-A". Do not use for wet sanding. used for appropriate conditions will reduce personal injuries. The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. Many accidents are caused by poorly maintained tools.
Direct particles away from face and body.
power tool.
Due to the danger of.
All the accessories listed below are available in our Piranha range. De entrar polvo en sus ojos, boca, o que este permanezca sobre su piel puede promover la absorcin de qumicos dainos.
Make sure the extension cord is in good condition before using. Wear safety glasses and a dustmask. Sanding of lead based paint is NOT RECOMMENDED due to the dif, contaminated dust. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.
changing accessories, or storing the tool. in the outlet, reverse the plug. cutting tool may contact hidden wiring or its own cord. By using these accessories you will get the very best from your tool. INSTRUCTIVO DE OPERACIN, CENTROS DE SERVICIO, Catalog No. Wear a dust mask specification cally designed for protection against toxic dust and fumes and ensure that persons within or entering the work area are also protected. Keep cord away from heat, oil, sharp edges or moving parts.
Warning! Workers should wash and clean up BEFORE eating, drinking, Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils, All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the, Plastic drop cloths should be gathered up and disposed of along with any dust chips or, other removal debris. Ajustement et dpose dune pice contour (fig.
tools, with sharp cutting edges are less likely to bind and are easier to control.
0800 339 258 (NZ), Haesehorn TL Black INSTRUCTION MANUAL Haesehorn TL Black 103987 WWW.QAZQA.COM, INSTRUCTION MANUAL Leopard TL Black 103985 www.qazqa.com, INSTRUCTION MANUAL Raga CL Black 103513 Overall Sizes: www.QAZQA.COM. Before use, inspect the extension cable for signs of damage, wear and ageing.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Black & Decker Service Centre in order to avoid a hazard. This enables bet-. be used. Distractions can cause you to lose control. When the front part of the tip is worn, detach it from the sheet, reverse it and press it onto the sanding base.
Carrying power tools with your finger on the switch or energizing power tools that have, d) Remove any adjusting key or wrench before turning the power tool on. This tool is intended for consumer use only. Let the tool work at its own pace.
INSTRUCTIVO DE OPERACIN, CENTROS DE SERVICIO Y PLIZA DE GARANTA. Cluttered benches and dark areas invite accidents. Do not force tool.
While holding the tool, pull the dust cassette (2) off the tool. 3). Vibration total values (triax vector sum) according to EN 60745: Australia & New ZealandStanley Black & Decker82 Taryn Drive, Epping, VIC 3076 AustraliaTel.1800 338 002 (Aust) or Tel.
The diamond-shaped tips (13) can be reversed and replaced when worn.
Properly maintained cutting tools with sharp.
Disconnect the plug from the power source before making any adjustments.
Let the tool work at its own pace. Before performing any maintenance, switch off and unplug the tool.
Remove adjusting keys or wrenches before turning the tool on.
Please check with the retailer for their specific. are used to help you recognize this information. Warning! Extended drywall sanding is not recommended for this product. With this sanding base, you can use the tool as a random orbit sander, Fitting and removing the sanding base (Fig. your finger on the switch or plugging in tools that have the switch on invites accidents.
% %PDF-1.4
If it still does not fit, contact a qualified electrician to, install a polarized outlet. There is an increased risk of electric shock if your body is, c) Do not expose power tools to rain or wet conditions.
For a medium finish for large detail sanding. Zone de travail CONSERVER CES MESURES. They should be placed in sealed refuse receptacles and disposed of, through regular trash pick-up procedures.
stream
Dispose of dust particles and any other removal debris safely.
Use of the power tool for operations different from those intended could result, a) Recharge only with the charger specified by the manufacturer.
cutting edges are less likely to bind and are easier to control. Use of an RCD reduces the risk of electric shock. All toys, washable furniture and utensils used by children should be washed thoroughly, polishing a wide array of flat surfaces such as hardwood floors, furniture, boats and other. 2), With this sanding base, you can use the tool as a detail sander or an orbital sander, Fitting and removing the sanding base (Fig. Save all warnings and instructions for future reference. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
Unmodified plugs and, matching outlets will reduce risk of electric shock.
Do not use detergents such as hand cleaners that contain abrasives.
MESURES DE SCURIT AVERTISSEMENT : Lire et comprendre toutes les directives.
Evite el contacto prolongado con el polvo proveniente del lijado, aserrado, amolado y taladrado elctrico y otras actividades de construccin. To remove the dust cassette, pull it to the rear and off the tool.
left attached to a rotating part of the tool may result in personal injury. Use of an extension cable not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. Keep proper footing and balance at all times. The dust cassette should be emptied every 10 minutes of use. Maintain tools with care.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
fire, do not use your sander to sand magnesium surfaces. Make this product avail- able for separate collection.Separate collection of used products and packaging allows materials to be recycled and used again.Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Warning! The term "power tool" in the warnings refers to your mains-operated (corded) power. dealer for the proper (NIOSH approved) mask. Do not sand magnesium! wire will make exposed metal parts of the tool "live" and shock the operator.
:F_Nu)cEAt+JEa4yD ti8O~tiE;}\wmN!ltC4vFF_!4"&y3yH;MN/brs1tsBCV\xYt8dn:BC0Y}!/4y;MvkAit^X+`wMu&iCiaS66k4uTvVi6!4uNS'MDt+M]4xheCii.!4xs;=Wi^n4uZ[]hw 5}{pi{mhqt}CiwqjEj!4m#JM2&aC;M[iN66Tw!4yH;M[YhLDIq4m}Cl; bhqDU&iCiNN;72Vt+ BiNV\wNM_i,F3@}&yCD_Fi>Ng4wN6>e]hN]h
This tool includes some or all of the following features.
dangerous in the hands of untrained users. For a coarse finish for large detail sanding. Keep your hair, clothing, and gloves away from moving parts. g) Use the power tool, accessories and tool bits etc., in accordance with these, instructions, taking into account the working conditions and the work to be per-, formed.
When the whole tip is worn, remove it from the sanding base and fit a new tip. Shake the lid (10) and dust cassette (2) to empty the contents, the filter (11) inside the lid (10) can be cleaned with a soft dry brush. Use these cleaners only by hand. Do not use a power tool while you are tired or under the influence of, drugs, alcohol or medication.
For small hard-to-reach areas. The symbols below. Do not operate power tools in explosive atmospheres, such as in the presence of, Power tools create sparks which may ignite the dust or. The following table shows the correct size to use depending on cord length and nameplate ampere rating. Also use face or dust mask if operation is dusty.
a) Stay alert, watch what you are doing and use common sense when operating a, power tool. Contact with a "live". Do not use tool while tired or under the influence of drugs, alcohol, or. It is important for you to read and understand this manual.
When servicing a tool, use only identical replacement parts.
Home Black Decker BLACK DECKER BLACK+DECKER Sander Instruction Manual, BLACK DECKER BLACK+DECKER Sander Instruction Manual. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool.
Other Important Safety Warnings and Instructions Extension Cords When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. ..safety alert symbol /min.
579208-00 (FEB-02-1) Copyright 2002 Black & Decker Printed in China, Be sure your power supply agrees with nameplate marking. A wrench. Never use the cord for carrying, pulling or unplugging the. The following pictograms are shown on the tool:Warning! seek medical help.
Do not change the plug in any way, eliminates the need for the three wire grounded power cord and grounded power supply, outlet. When using a cable reel, always unwind the cable completely.
Hold power tools by insulated gripping surfaces when performing an operation, where the cutting tool may contact hidden wiring or its own cord. unfamiliar with the power tool or these instructions to operate the power tool. always using identical replacement parts. :S]i :`NuS]i :&mS]hCt+MN4Bt+ DAtM+:F_NuCiw}! Never modify the plug in any way. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life.
Do not eat, drink or smoke in the work area. If you can't find the answer or do not have access to the internet.
we recommend the following precautions when sanding any paint: should be replaced daily or whenever the wearer has difficulty breathing.
The polishing bonnet and foam pad attach to the round random orbit base.
Black & Decker offers a full network of company-owned and authorized service locations. The information it contains, relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's, operation. Use vestimenta protectora y lave todas las reas expuestas con agua y jabn. Maintain tools with care. Use the correct tool for your application. 60 grit large detail sanding sheet with two replacement tips.
7). Your tool has been designed to operate over a long period of time with a minimum of maintenance.
c) Prevent unintentional starting. El producto defectuoso ser reemplazado o reparado sin cargo alguno en cualquiera de las siguientes dos maneras: La primera, que resulta nicamente en cambios, es regresar el producto al vendedor al que se compr (en la suposicin que es un distribuidor participante).
g*2Ne3'o6h=6?5}tORBc\z1v1&t"c4y;MNk_6wFE;PziN/RiFONTv}N_iq*=v}F(o4xX"`kqh| W2vKh.chj%4x(qCI;(y4x(u3yh;(}i0wBV+ jiPN/jiE;MFWw}QNiNw}FS4&}hs=4x=4^vc Fi; v;e^L+Z&}6S]i :Bt+ DAt+J/Do4eTW}! Use only accessories that are recommended by the manufacturer for your model.
-- Fri. to speak with an agent. f) If operating a power tool in a damp location is unavoidable, use a residual current.
Cluttered or dark areas invite accidents. :F_Nu)cEAt+J4xJ.4lCt+MNztS]:t]v;MFV0Ea4y; Dti :S]iEtivDAt+J4xBV0E4y;MN/D]TW}! Black & Decker owned and authorized Service Centers are listed under "T, Electric" in the yellow pages of the phone directory, This warranty does not apply to accessories. the switch is dangerous and must be repaired. ADVERTENCIA: LASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. Read all safety warnings and instructions.
:F_NuTWS]iTza4Bt+ DAt+ D:%/DAt+MN/D4y +>F_NuS]i :S]h Dont expose power tools to rain or wet conditions. Replace damaged, tool.
Do not use tool if switch does not turn it on or off.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
7 0 obj If, contact accidentally occurs, flush with water.
Lower voltage will cause loss of power and can. Warning! In both cases, gradually change to a fine grit for, Recommended accessories for use with your tool are available at extra cost from your local.
Slide the dust cassette (2) onto the tool and make sure that it is securely located. This will ensure that the safety of the power tool is maintained. Under some, Some dust created by power sanding, sawing, grinding, drilling, and other, Allowing dust to get into your mouth, eyes, or lay on the skin may promote, Use of this tool can generate and/or disperse dust, which may cause serious, When working on metal surfaces, do not use the dustbag or a vacuum cleaner, Only those dust masks suitable for working with lead paint dust and fumes should. reglamentario, tal como una mscara contra el polvo especialmente diseada para filtrar partculas microscpicas.
Use of dust collection can, a) Do not force the power tool. This tool is double insulated; therefore no earth wire is required. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. Many accidents. Do not push downlet the sander do the work.
If you require an accessory that is listed below but is not supplied with your sander please visit our website at www.blackanddecker.eu. Keep cutting tools sharp and clean. MS700 Form No. Warning! f) Dress properly.
e) Maintain power tools. The greatest danger of lead poisoning is to children and pregnant. For severe damage, only a professional car detailer or reconditioner, may clog the bonnet. a) Keep work area clean and well lit. b) Do not operate power tools in explosive atmospheres, such as in the presence of, flammable liquids, gases or dust . Power tools are dangerous in the hands of untrained users.